Die Mold Transporters
The die mold transfer carts are designed to handle and transport dies or molds between the pressroom and the die storage and maintenance area. The transfer carts can be used to handle various materials, such as industrial pipes, coils, heavy equipment, structural steel, and components. These kinds of die mold transfer carts can be powered by the rails, battery, or cable reel depending on your load transport requirements.
The trackless die transport cart is driven by a motor and gear reducer. The rubber wheel can run the common ground directly, which has no limited running distance, imported wheel can reduce the damage to the ground. 360° in-place turn for more narrow space operation, 360° no corner protection, dead man stop, and so on to protect the safety. Touch screen, rocker...which make the design more humanization.
The size and load capacity of the transfer cart can be customized as the size of material and workpiece, or the customer's demands.
Parameters
Load Capacity: 1~500 ton
Table size: can be customized
Wheelbase: 1200~7000mm
Wheel Material: rubber-covered wheel, automobile rubber tire
Walking control mode: forward and backward, turning while walking, 360 ° rotate
Running speed: 0~30m/min(Stepless speed regulation)
Control mode: button / remote control
| Technical parameters for trackless electric transfer carts |
| Rated load(t) | 5 | 10 | 15 | 20 | 30 | 40 | 50 | 150 |
| Impacted rated loa(t) | 7.5 | 15 | 22.5 | 30 | 45 | 60 | 75 | 225 |
| Structure of frame | steel plates welded, beam structure |
| Max. wheel load(t) | 2.8 | 4.3 | 4.8 | 5.6 | 7.7 | 10 | 12 | 27 |
| Ground requirement | cement floor | steel plate ground |
| Table size(mm) | 3000×
2000 | 3600×
2000 | 4000×
2200 | 4500×
2200 | 5000×
2200 | 5500×
2300 | 6000×
2300 | 10000×
3000 |
| Height of the whole cart(mm) | 450 | 530 | 600 | 600 | 650 | 700 | 700 | 1200 |
| Ground clearance(mm) | 50 | 75 |
| Turning radius(mm) | 2501 | 3101 | 3401 | 3901 | 4301 | 4801 | 5201 | 10001 |
| Turning type | turning while driving with no stop |
| Control method for turning | control button |
| Turning structure | mechanical |
| Wheel material | ZG55+hydropur ture |
| Running speed(m/min) | 0-15 | 0-12 |
| Brake principle | electric magnetic brake |
| Operation method | with wire or no wire |
| Battery model | D-250x24 | D-33x24 | D-400x24 | D-440x24 | D-250x36 | D-330x36 | D-440x36 | D-600x36 |
| Battery maintenance | free of maintenance |
| Charger's installation | installed on cart | split-type |
The material transport cart is battery-powered. The battery is installed in the transfer cart. The batteries supplied the electricity to the DC motor through the electrical control system. Using this principle, we can make the motorized transfer cart start, stop, go forward, backward, adjust the speed, and so on.
1. 360 Degree Cornerless Turn: The turning mode of the transfer cart adopts a mechanical type, and the turning of the flat car is controlled by the gap of speed.
2. Remote Operation, Safe and Reliable: The transfer cart adopts wireless remote control with a control distance of 400m to meet remote operation and high safety factors.
3. Higher Safety Load Factor: The transfer cart adopts the box girder structure. The wheel adopts the car processing, heat treatment, and the safety factor of the cart can be reached at 1.5.
4. Long Service Lifetime: The battery adopts maintenance-free power, the table of the cart is not easy deformation in 20 years.
Product Tags:
|
|
Die Mold Transporters Images
|
